Page 1 of 1
long shot- but I need T500 oil pump lines
Posted: Thu Oct 01, 2015 5:34 pm
by sbaugz
My oil pump lines from my T500 are cracked where they both come off the oil pump. Anyone have any leads on another set?
Re: long shot- but I need T500 oil pump lines
Posted: Fri Oct 02, 2015 1:06 am
by GTandcbr
If all else fails
http://www.ebay.fr/itm/Suzuki-T-500-GT- ... 2ca2500fdb" onclick="window.open(this.href);return false;
(Not cheap though)
Re: long shot- but I need T500 oil pump lines
Posted: Fri Oct 02, 2015 2:01 am
by joolstacho
That's just daylight robbery eh? (cynical little prick seller!)
Can only hope something horrible happens to the him/her... bit of Karma maybe.
Surely lads, it cannot be beyond our combined capabilities to sort out specs for replacement lines from commonly available hose stock!?
Jeez all it has to do is allow oil to flow at low pressure!!!!!
What can be THAT hard?
Re: long shot- but I need T500 oil pump lines
Posted: Fri Oct 02, 2015 4:18 am
by rngdng
I use an epoxy known as "The Plastic Welder" on lots of plastic stuff. It sticks to nearly any type of plastic and seems to be resistant to everything. A nice, neat bead, or glob if you prefer, may hold you until some kind person sells you a set or you come up with something else.
Lane
Re: long shot- but I need T500 oil pump lines
Posted: Fri Oct 02, 2015 6:07 am
by ChrisK
If you mean the lines from the pump to the crankcase inputs, I've got a couple of sets here you are welcome to for the cost of the postage from Oz (they are very light so I don't think it would be much). Let me know.
Re: long shot- but I need T500 oil pump lines
Posted: Fri Oct 02, 2015 3:42 pm
by sbaugz
ChrisK wrote:If you mean the lines from the pump to the crankcase inputs, I've got a couple of sets here you are welcome to for the cost of the postage from Oz (they are very light so I don't think it would be much). Let me know.
wow, that's awesome. I will take you up on that offer.
PM being sent. Otherwise my e-mail is sbaugz at msn.com
Re: long shot- but I need T500 oil pump lines
Posted: Sun Oct 18, 2015 7:28 am
by Coyote
Now, THAT'S a stroke of luck!