Page 1 of 1
Handlebar clamps
Posted: Wed Nov 17, 2010 7:13 pm
by Suzsmokeyallan
Looking for a set of the handle bar upper half clamps for a Buffalo, 550 are the same too.
Re: Handlebar clamps
Posted: Wed Nov 17, 2010 9:10 pm
by Coyote
Allan. Me gots a set off a 550 round here some place. Give me a chance to dig em out and then we can correspond. Won't cost you much --- just shipping to Dave I would suspect.
Re: Handlebar clamps
Posted: Wed Nov 17, 2010 9:51 pm
by Coyote
Found them. I started to strip and polish these once by soaking the pieces in thinner. Wound up going in a different direction. Most of the remaining paint is removable with a thumb nail. A trip through the dishwasher might get all of it.

Re: Handlebar clamps
Posted: Sun Nov 21, 2010 3:26 pm
by Suzsmokeyallan
Thanks for the pic, the thing is I only need the two top half clamps and not the whole tree, I've got plenty of those already.Do you care to part them from the tree itself.
Re: Handlebar clamps
Posted: Tue Dec 07, 2010 9:21 am
by Coyote
I realized you just needed the caps after re-reading your post. Caps are not the greatest (chewed up from lock washers), but you can have them if you want.
Also still available from Suzuki # 56211-27200-291 but a little pricey at around $11 each. NOS ones show up on ebay from time to time.
