Suzuki 2 Strokes

As the the title says, I am looking for a GT550 rear engine spacer as the PO must have forgot to put it in when he had the engine out

Thanks


A member of the Kettle clinic, kindly sent me a nice zinc plated spacer!

Rustygt550 wrote:the PO must have forgot to put it in when he had the engine out

That's an extra part, right?

You need the spacer that the rear upper engine mounting bolt goes through? Suzuki shows its part number (09180-10030) being the same as for the GT750. If that's the case I'm sure I have one, although shipping from the states may be more trouble/money than it's worth?

Thanks for the info, the spacer is no longer available, maybe I will be able to find a spacer this side of the pond

Just went out & had I look at the engine( it's out of the bike at the moment awaiting strip down over Christmas holidays). It turns out its the lower rear engine spacer. I put the part number into my Suzuki parts cross reference & it also fits the gt750

OK should have that one too. Let me know if you don't find anything your side of the world, glad to help if I can.

Just looked at the spacers out of the GT550 engine that I have on the workbench. The upper and lower are both the same. 10.2mm ID, 16mm OD, 107mm long. If you can't find an original, cut a piece of pipe to fit.
Cliff.