Suzuki 2 Strokes

This is the outer piece that has the angle adjustment screw going through it, and its held on to the bucket by a clip at the top, and two lower screws. Part no. 35111-34030

Doesn't have to be show quality, but must be straight, and have nice chrome.

Thanks

Though the part numbers are different, it appears to be exactly the same as the rim as used on my GS1000. It is straight, round and has perfect chrome. It has a small scuff on the leading edge at about the 2 o'clock position. Overall outer diameter is 8 1/32. Inner diameter is just under 7 3/8". I can post pictures if you are interested. The price is right. No money! - just shipping.

Damn, that price is right! The measurements seem to be real close. Maybe if you post a good pic from the backside I'll get an idea if the tabs line up.

Seems odd that it would be the same, and have a different part no. though.

Thanks,
Dean

Pay no never mind to what appears to be flaws in the chrome. Damn Nikon picks up everything. The chrome on this thing is perfect or I wouldn't have responded in the first place.



The scuff at the 2 o'clock position

All the ears appear smaller, but that wouldn't matter if it fits, although the hole for the angle adjustment screw looks like its on the right side in your pic, and mine would be on the left viewing from the back.

Sorry I couldn't help you. The adjustment screw hole is on the left on mine - viewed from the front.

Thanks anyway.

I have a very good conditioned one from a 76 750. No rust on exterior, very little on interior. No dents, dings, etc. Minimal wear. It should polish up pretty nice. 20 bucks, takes it. Shipping included.

pearljam724 wrote:I have a very good conditioned one from a 76 750. No rust on exterior, very little on interior. No dents, dings, etc. Minimal wear. It should polish up pretty nice. 20 bucks, takes it. Shipping included.

As long as its not pitted I'll take it. Let me know how you would like to be paid. Thanks

Blokhead wrote:

pearljam724 wrote:I have a very good conditioned one from a 76 750. No rust on exterior, very little on interior. No dents, dings, etc. Minimal wear. It should polish up pretty nice. 20 bucks, takes it. Shipping included.

As long as its not pitted I'll take it. Let me know how you would like to be paid. Thanks

No pitting on exterior. Interior has very little rust. Paypal, I guarantee your satisfaction as to what I described or your money back, minus shipping. No questions asked. Id have no problem posting a couple pictures. But it's sitting in my storage facility and I've been working a crap load of hours with little sleep in between. If you'd rather wait for me to find the time to add a picture or two. No problem.

Sounds good, PM me your Paypal add., and I'll send it.

Pm sent.