Suzuki 2 Strokes

I have a slow leak at my oil tank outlet, where the coupling comes in from the side. There should be two gaskets, one on either side of the coupling, gasket # 09168-06002. Does anyone know what color these gaskets are? I can see some whiteness in there, but not sure if they are what they should be. I tightened the union bolt (it was loose) and the leak has stopped. But I do not want to have an oil starvation issue and so I may need to replace.

Here is the question, look at picture, there is a one inch air bubble in my line now. Should I bleed this out and how does one do that? Thanks guys, LexPaul

To bleed that line, I would crack the bolt where the line joins the pump and let gravity do your work for you.

The original washers were white plastic.
Suzuki currently sells aluminum crush washers, which don't seem to work all that well.

Stat-o-seal washers is a good alternative if you decide to replace them.
They're available at McMaster-Carr: http://www.mcmaster.com/#stat-o-seal-washers/=unbb8w

Thank you gentlemen,,