Suzuki 2 Strokes

Does anyone know if there is a washer behind the clutch assembly or does it ride against the bearing ? I am building a 74 motor with the clutch from a 75. The shop manuals I have, old Clymers, show a washer in the back. Neither motor had one when I disassembled them.

Here's the fiche: #3 is a washer http://www.partzilla.com/parts/search/S ... parts.html" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

You need to look at GT26 here
http://www.ozebook.com/compendium/techbuls/" onclick="window.open(this.href);return false;

Thanks for the replies. Every diagram I see is different. The service bulletin on the upgrade to the newer borg warner starter bearing looks like it does not have one. The primary and driven gear line up almost perfectly so hopefully I have it right.

I'd buy the old clutch off you but the postage would be a killer I think.

Hi The part number is 08211-22503 there are some for sale on ebay. this is the washer between inner and outer casing on the clutch.
The other one is part number 08211-22423 this is the one behind clutch.
Hope this helps.
Ray