GT550 SRIS Oil Lines Correct Connection Squence
Posted: Sun Jun 04, 2017 3:24 am
Hello, I am just about to connect the 3 x small oil lines from the bottom of the crank case to each the 3 x cylinders and I just want to double check if the attached diagram from the GT550 service manual is based on looking at the front of the bike ie; the RH side would be correct when looking at the front of the bike as shown on the drawing Fig 7-4-1? I assume it is important to ensure the 3 x oil lines are connected in the correct sequence. Can anyone confirm that is correct before I proceed further? Thanks