Retro, Wild, Cafe, etc. The stuff only your imagination can come up with.
Moderators: oldjapanesebikes , H2RICK , Suzsmokeyallan
bighole
To the on ramp
Posts: 204Joined: Sun Oct 19, 2008 8:20 pmLocation: Dansville, MI
Post
by bighole Wed Mar 10, 2010 9:47 am
So I decided to start another one....
I'm sure this will take a while as I started gathering parts 2 years ago and this is as far as Ive gotten. Katana frame with a TL1000R swingarm (thanks durgam for the machining) gsxr front end, and God knows what else by the time its all said and done. Sorry for the poor quality pic.
-John
My bike is a "bighole" I keep throwing money into, so I had to get another!
Zook-e
Smokin'
Posts: 617Joined: Mon Oct 13, 2008 7:29 pmLocation: Southwestern Virginia
Contact:
Post
by Zook-e Wed Mar 10, 2010 10:12 am
Nice, but won't the lower engine mount drag a little bit? Maybe you could taper it some for better ground clearance.
"If you keep hitting your head against the wall you will eventually put a hole in the wall or your head"
bighole
To the on ramp
Posts: 204Joined: Sun Oct 19, 2008 8:20 pmLocation: Dansville, MI
Post
by bighole Wed Mar 10, 2010 10:16 am
I figured since it was plastic I'd let the pavement do that for me! Plus this way I dont need a kickstand!
My bike is a "bighole" I keep throwing money into, so I had to get another!
Suzukidave
Moto GP
Posts: 3980Joined: Fri Oct 24, 2008 5:55 pmCountry: USSuzuki 2-Strokes: GT750 x2 97 -1200 Bandit 86 GSXR1100Location: Lancaster Pa.
Post
by Suzukidave Wed Mar 10, 2010 10:21 am
Hi John , looks like a point i was at some time ago .. lots to figure out huh
the older i get the faster i was
