Suzuki 2 Strokes

The tach drive gear is driven by the points cam shaft. The tach drive gear & sleeve looks like this:


I removed the gear & sleeve from the clutch cover prior to having the clutch cover polished & clear coated.
The sleeve has the flat surface & hole that are shown in the pic. It has another hole that isn’t shown in the pic — that hole is opposite to the flat surface.
The sleeve is held in place with a screw.

Its not clear how the sleeve is oriented in the clutch cover. Anyone know?

Question answered. I bought a used clutch cover to make sure.

The assembly is positioned by a screw located behind the points. The screw has an unthreaded section on the end that engages the sleeve hole that is furthest from the drive gear.

Good info. Thanks for posting