One of my oil pump lines has broken from my GT500, and it seems that NOS replacements are no longer available/easy to find.
I've been searching for:
16820-15033 (13), 16840-15033 (14), 16810-15131 (10), my #14 line is broken.
http://www.ozebook.com/compendium/gt500 ... arts85.htm" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Now I might be able to repair mine, but I was thinking that perhaps it might be easy to just create one from new parts.
Anyone done this before and or can recommend the bill of materials to do this?
I am not with my bike, but I do recall the tubes had narrow inner diameters...I am not sure I'll be able to match these...but is the pressure important? i.e. if I used larger inner diameters then the pressure would drop...or would it?
![WTH :wth:](./images/smilies/icon_wtf.gif)
Any advice or links to places where new ones can be bought would be most appreciated!
![up :up:](./images/smilies/icon_thumbup.gif)